Calculation tool
SBAR013 — Isolated Amplifier Voltage Sensing Excel Calculator
This calculator provides estimates of the errors associated with using isolation amplifier devices in a voltage sensing configuration.
AMC0381D
- Integrated, high-voltage resistive divider for direct DC voltage sensing without external resistors
- Differential output
- Supply voltage range:
- High-side (VDD1): 3.0V to 5.5V
- Low-side (VDD2): 3.0V to 5.5V
- Low DC errors:
- Offset error: ±0.8mV (maximum)
- Offset drift: ±10µV/°C (maximum)
- Attenuation error: ±0.25% (maximum)
- Attenuation drift: ±40ppm/°C (maximum)
- Nonlinearity: 0.025% (maximum)
- High CMTI: 150V/ns (minimum)
- Low EMI: Meets CISPR-11 and CISPR-25 limits
- Available input options:
- AMC0381D06: 600V, 10MΩ
- AMC0381D10: 1000V, 12.5MΩ
- AMC0381D16: 1600V, 33.5MΩ
- Safety-related certifications:
- 7000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000VRMS isolation for 1 minute per UL 1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC0381D is a precision, galvanically isolated amplifier with a high-voltage DC, high impedance input, and fixed-gain differential output. The input is designed to connect directly to a high-voltage signal source.
The isolation barrier separates parts of the system that operate on different common-mode voltage levels. The isolation barrier is highly resistant to magnetic interference and is certified to provide reinforced isolation up to 5kVRMS (60s).
The AMC0381D outputs a differential signal proportional to the input voltage. The differential output is insensitive to ground shifts and enables routing the output signal over long distances.
The AMC0381D is available in three linear input voltage ranges: 600V, 1000V, and 1600V. With an integrated precision resistive divider, the AMC0381D achieves better than 1% accuracy over the full temperature range, including lifetime drift.
The AMC0381D is available in a 15-pin, 0.65mm pitch SSOP package. The device is fully specified over the temperature range from –40°C to +125°C.
Technical documentation
No results found. Please clear your search and try again.
View all 3 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | AMC0381D Precision, High-Voltage DC Input, Reinforced Isolated Amplifier With Fixed-Gain Differential Output datasheet (Rev. B) | PDF | HTML | 19 Nov 2025 |
| Application note | AMC0386 Output Histograms in HEV/EV Traction Inverter Voltage Sensing Application | PDF | HTML | 05 Nov 2025 | |
| Application note | Pairing Isolated Amplifiers With SAR AD Converters | PDF | HTML | 24 Sep 2025 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
AMC038XEVM — AMC038x evaluation module
The AMC038x evaluation module (EVM), in conjunction with one of the AMC038x devices, demonstrates a high-precision, high-voltage sensing design. The evaluation module is capable of measuring up to 1600V input voltages with no external voltage dividor resistors needed. The design also includes a (...)
Calculation tool
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
This calculator provides estimates of the errors associated with using isolation amplifier devices in a current sensing configuration.
Supported products & hardware
Products
Isolated amplifiers
Isolated ADCs
Precision ADCs
Simulation tool
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs
TIDA-01606 — 11-kW, bidirectional three-phase three-level (T-type) inverter and PFC reference design
This reference design provides an overview on how to implement a bidirectional three-level, three-phase, SiC-based active front end (AFE) inverter and power factor correction (PFC) stage. The design uses switching frequency up to 90kHz and an LCL output filter to reduce the size of the magnetics. (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SSOP (DFX) | 15 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.