SEGGR-3P-J-LINK

SEGGER J-Link family of debug probes

SEGGR-3P-J-LINK

From: SEGGER
Order now

Overview

SEGGER J-Links are an industry-leading line of debug probes for embedded systems development. Known for their exceptional speed, reliability, and versatility, J-Links have become the go-to tools for developers around the world. For over two decades, these probes have been essential in enabling efficient debugging, programming, and performance analysis across a broad range of embedded applications and industries.

J-Link debug probes are the preferred solution for optimizing both the debugging and flash programming experience. Users benefit from record-breaking flash loaders, RAM download speeds of up to 4 MB/s, and the ability to set an unlimited number of breakpoints in microcontroller flash memories. This combination of speed, flexibility, and reliability makes SEGGER's J-Link an essential tool for anyone working in embedded systems.

To view the extensive list of TI MCUs supported by J-Link, please visit:
https://www.segger.com/supported-devices/ti 

Features
  • Ultra-fast flash programming and RAM download speeds
  • Unlimited breakpoints in flash memory (J-Link PLUS and up)
  • Real-Time Transfer (RTT) technology for extended debug information
  • Built-in virtual COM port functionality (VCOM)
  • Supports large variety of TI MCUs
  • Use of SEGGER Ozone debugger included (J-Link PLUS and up)
Arm Cortex-M0+ MCUs
MSPM0C1104 24MHz Arm® Cortex®-M0+ MCU with 16KB flash, 1KB SRAM, 12-bit ADC MSPM0G3507 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHA MSPM0G3519 80 MHz ARM® Cortex®-M0+ MCU with dual-bank 512kB flash, 128kB SRAM, 2xCAN-FD, 2xADC, DAC, COMP MSPM0H3216 32MHz Arm® Cortex®-M0+ MCU with 5V supply, 64KB flash, 8KB SRAM and 12-bit ADC MSPM0L1117 32MHz Arm® Cortex®-M0+ MCU with 128KB dual-bank flash, 16KB SRAM, 12-bit 1.68Msps ADC MSPM0L1306 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L2228 32MHz Arm® Cortex®-M0+ MCU with 256KB dual-bank flash, 32KB SRAM, 12bit ADC, COMP, LCD, VBAT, PSA
Download View video with transcript Video
Photos courtesy of SEGGER

Order & start development

Debug probe

J-Link BASE Compact (8.19.00) — Entry-level debug probe (Compact housing)

Supported products & hardware
Debug probe

J-Link PLUS Classic (8.08.28) — Entry-level debug probe with additional features (Classic housing)

Supported products & hardware
Debug probe

J-Link PLUS Compact (8.19.28) — Entry-level debug probe with additional features (Compact housing)

Supported products & hardware
Debug probe

J-Link PRO (8.12.00) — The ultra-fast debug probe with Ethernet

Supported products & hardware
Debug probe

J-Link PRO PoE (8.12.28) — The specialized high-end debug probe for test farms

Supported products & hardware
Debug probe

J-Link ULTRA+ (8.16.28) — The ultra-fast debug probe

Supported products & hardware
Debug probe

J-Link WiFi (8.14.28) — The debug probe with WLAN/WiFi interface

Supported products & hardware
Debug probe

J‑Link BASE Classic (8.08.00) — Entry-level debug probe (Classic housing)

Supported products & hardware
TI's Standard Terms and Conditions for Evaluation Items apply.

Support & training

Third-party support
TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact SEGGER.
Disclaimer

Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.