The thermal models contained within this compressed file are property of 
Texas Instruments are provided without warranty and subject to change without 
notice, specifications are subject to change.  The included models are
designed to work with Mentor Graphics(R) Flotherm and have been tested on
version 9.2 only.  The included models support the following devices utilizing
the 21mm NFBGA package only:
	
	66AK2G1x

It is the responsibility of the end user of these files and application
hardware to assure that each device does not exceed the allowable thermal
conditions established and documented within each respected application note
or data manual.

When no data manual exists, the maximum allowable junction temperature shall
not (under no condition) exceed 90°C, failure to comply with this requirement 
will reduce device reliability and void any device warranty. 

The models provided include standard 2R and Delphi models. The standard 2R model is two
resistor model based on the junction-to-board (theta-jb) and the junction to
case (theta-jc) parameters provided in the data manual.
